All bikes must pass technical inspection prior to admittance to the track. If your bike does not pass tech inspection, you will not receive a refund. It is your responsibility to have your bike prepared prior to riding on the race track.
- Tires and brakes must be in good condition. Tires should be at least 50%+ of new condition. Any tires that are bluing from excessive wear will not be allowed.
- All glass, headlight, turn signals, and plastic lenses must be taped over or removed. Unplug lights if possible. Side mirrors removed for all groups if possible.
- No center stands allowed. We recommend removal or safety wire of kick stands, if not kickstand kill switch must be operational.
- All machines must have an operational handlebar mounted kill switch/button and self-closing throttle in good working condition.
- All valve stems must have caps.
- Wheel balance weights must be well secured and duct taping is required.
- License plates must have bolts taped or be removed.
- Cameras must be tethered to bike. No Helmet/Chest attachments allowed
- Advanced and Intermediate group riders must use water, water wetter, or a non-Ethylene Glycol based anti-freeze/coolant. Approved Propylene Glycol brands are: Evans, 7th Gear, Liquid Performance, and Engine Ice. Automotive Ethylene Glycol based coolants are not allowed.
- Advanced and Intermediate riders only must safety wire oil drain plugs, oil filter, and oil fill caps. Novice riders will not be bumped to intermediate until bike is properly safety wired. **No external K&N oil filters in all groups**
- Novice riders will not be bumped to intermediate until bike is properly safety wired and ethylene glycol coolant removed.